...That is called the mulion strip and it is supposed to be hot to prevent mold from growing between the doors under the gasket. It is
to get hot. some times the fill very hot. many people don't notice this. There is a small mullion heater plased around the doors so that the gasket will not freeze and the door will stick and not open
...gasket wont properly stick giving you that air tight seal. This is the defroster that keeps the doors from icing up. This is supposed to run intermittently - it is on all the time. There may be a ...
Refrigerator Defrost Parts for illustrations. The first answer Katherine correct one with one exception; you do not have a problem in the defrost system because you are getting water from the defrost.
...refrigerator is supposed to self-defrost approximately four times in every 24 hour period. If one of the components in the self-defrosting system fails, the refrigerator continues to try to cool. ...
...refrigerator/freezer My ref/freezer which still works OK feels warm>>>hot to the touch. Especially on the front perimeter (4 inches around the sides and top) and between the ref/freezer doors (center ...
...gasket has been resealed but did not help. It is still under warranty Make sure the temperature is at the level its suppose to be and that hot air is not blowing on it or thats its not in a extremely ...
...supposed to be hot its to keep the gaskets dry but you can clean the coils on the fridge if you haven't for awhile that will help keep them the right temp as far as setting the temps i always using ...
...refrigerator. Water is leaking on floor in front and can also sometimes be found under the two crisper bins at the bottom. Nothing else feels wet! I will check for gasket looseness per Bob Villa's ...
41 questions posted
Usually answered in minutes!
599 Questions
580 Questions
207 Questions
170 Questions
162 Questions
