Bissell 1685 PowerSteamer Vacuum "turbo nozzle plugged" Questions

...Turbo plus's power nozzle brush seems to disengage temporarily, stopping the spin. Then it seems to re-seat itself after a few seconds, then starts spinning OK. I keep the nozzle brush very clean, so ...

...turbo flow indicator will not turn no cleaning agent getting thru Mine does that, too. Pushing down and wiggling the tank usually gets it going. Also, it doesn't seem to work when the soap bottle is ...

...turbo nozzle :/ I hope its not gone... thanks! no its not gone. maybe its the paper filter issue. good luck! https://www.buybusinessclass.com/ Check the contacts at the front where front cover and ...

turbo steam on and weight 1 to 2 minutes for water to get hot. Step nine: move slide to steam and pass nozzle over stain. step ten: switch to vacuum to **** up moisture. I suppose you could use vacuum

...nozzle of the heater was blocked by water/soap reacting with the aluminum while in storage. Blowing out the lines as recommended with air compressor just warped the stainless cover resulting in time ...

i just bought a bissel pro heat 2x used and i cant get the water to come out after it is on Hello There, There are a number of things that cold cause no water is coming out. -Fill up the clear water ...

I have a bissell pro heat water wont come out I have a bissell pro heat 12 amp. no water will come out.I am a sinior and do not have alot of income.I have had this bissell worked on once before.That ...