Question about Vacuums
...then. Replaced belt. Still so loud it hurts my ears! Clean filters, new belt, bin is empty Could be the brush roll, remove brush roll and see if noise is still there when brush roll motor is
Question about Bissell Vacuums
...loud noise when brush roller is turned on dirt is being picked up ok, but a loud noise is heard when the brush roller is turned on. It sounds like the brush is hitting something Inspect the area ...
Question about Electrolux Vacuums
...brush roll spins but the vacuum is real loud like it's going to exploded I have Electrolux brush roll vacuum EL8002 brush roll spins but the vacuum is real loud like it's going to exploded . Some of ...
...brush spin on the floor? Loud noises are usually caused by worn belts, unbalanced roller brush or debris in the roller brush. Check these things. Here is a link to the belt you need: Dyson DC17 ...
...brush roller loud noise when pulling the unit backwards from the brush roller area Hi its Darran at Dyson. Maybe worth checking the brush bar and cleanerhead for a blockage or for any damage. If you ...
Question about Hoover Vacuums
...spray a bit of WD40- if you do that wipe well before you vacuum. Finally....if the vacuum was still loud with the brush bar off...you have a motor problem and that could be expensive. ...
...loud will be the line is clog up and need to unclog the line, rubber burning will be the belt, which is worn or the brush is jam not allowing the brush to spin freely. check and clean the line and ...
...loud, it could be due to a problem with the brush roll, the belt, or the motor. Here are a few things you can try to troubleshoot the problem: Check the brush roll to make sure it is not clogged with ...
Question about Hoover Vacuums
...is a loud popping noise coming out the top of my upright vaxair Hoover usually loud sound is carbon brushes reached their limit in length shortness and brushes are sparking against the ...
...loud, then you could have a bad motor(part #60775-4). ok, i guess it is the motor then because i checked the brush and it turns and the belt seems to be okay now, just loud motor. thanks for the
73 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions