Bissell Powersteamer 1694 Upright Vacuum "water not pump" Questions

Water pump breakdown for bissel crosswave Water pump assembly for bissel crosswave The water pump in a Bissell CrossWave is a vital component that is responsible for pumping water from the tank and ...

...water pump 1/2 hp when pump starts works well but pump does not cut out when all taps in the house are closed it sounds like the switch is faulty take it back to the shop and tell them ok Check your ...

...water is siphoned manually through the tube. Then the pump come on and empties the bucket. I have reattached the tube and still had to manually siphon the water through the tube. Any suggestions? Any ...

...Another problem I occasionally see on this unit is the pump gets full of soap suds and will not pump water. Sometimes I can get it working agian by removing the lines and flushing out all the

...pump, or could be soap clogging the main water lines. Try flushing the water lines out with warm water. A good way to see if this is the problem is to try using the hand tool. If the hand tool sprays ...

...sure the pump is working. If water comes from the upholstery tool. But not at the floor it may indicate the heater Has a clog or restriction. Make sure there is not anything clogging the spray

water through the pump system. I am repairing a Bissell Model 8920 Pro-Heat 2X that has this very same problem. I tested all the hoses to verify that they were not plugged. I then hooked the water and

...com will not spray water out but will suck up water Replace belts as they run pump. If water at tool but not at floor the heater or water jets clogged. If no water at all the pump may need ...

...water. Could it be the pump or solenoid, or both? It could be the pump. You can open it up and see if the pump is working by taking the pump input tube and inserting it into a bowl of water. Pull the ...

... I put the water in the bowl and turn it on and the light never came on and the water try the pump in a small bowl. sometimes the pumps loose thier prime- pour water in the suction side with it ...