...Heat? The brush or brushes (depending on your model) can be removed if needed. Routine cleaning should just require removing hair and debris from the brushes and wiping the area around the brushes. ...
...remove the brush roll and belt and reverse the process with the new belt. Some models have the brush roll held in by screws and/or brackets, some brush rolls slide down into slots. Replace the brush ...
brush arms in place. Remove the two Phillips head screws to access the toothed brush belt. Check to ensure the belt is intact and looped around the brush end, as well as the red pulley with the ridges
...brush roller that you can simply remove. The next best is that the end caps of the brush are full of junk that you will be able to remove. Its not easy getting the brush out to clean there but it can ...
...brush roller that you can simply remove. The next best is that the end caps of the brush are full of junk that you will be able to remove. Its not easy getting the brush out to clean there but it can ...
Heat 2x steam cleaner. The belts both appear to be okay, yet the brushes won't rotate. Is there anything else I can try to see if I can fix it? Must likely the brush motor is bad. The top cover has to
bissell proheat 25a3 the belt is smoking Your belt is worn out now because it has heated up and stretched. Take the belt off, You can get to it by removing the cover underneath near the brush. You may
...brush roller that you can simply remove. The next best is that the end caps of the brush are full of junk that you will be able to clean. Its not easy getting the brush out to clean there but it can ...
remove the 4 screws on each side using a Philips screw drive set the screws and the brush cover aside. - pull brush straight out and you will see the gray rubber band. -replace the new drive belt over
315 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions