...clear plastic shroud that covers the brushes in order to clean behind it. Upon re-installation, she did not secure the top part correctly. On the end near the water tank, there are two tiny half-moon ...
...clear nozzle cover over the inlet that will snap out when you lift the front. Be very careful when replacing the screws. They are prone to strip the plastic if you over tighten them. Also make sure ...
plastic opening when pushed down firmly. Resevoir then sits on top and makes full connection, also ensure that grey locking handle is fully pushed down. Seemed to me that the water wasn't being sucked
...clear plastic hood removes with a few screws connected to the base at the bottom. the top part snaps out. :) The clear view window is unscrewed with a philips screw driver on either side of the nosel ...
clear plastic hood window, by unscrewing two screws on either side of nozzle opening (top ) and rinse out as well. Do not, get water under unit into motor area. Place unit upright and in a warm place.
...the cover of the powerbrush so that I can clean out all the dirt. there are two screws on the front of the clear plastic end. take off those two and your set.. Be carefull when you pul it
...clear plastic section on the front of the machine. The clean water bladder is soft plastic and it is filled from the top. When you start using the machine, the dirty water will get suctioned into the ...
...clear plastic pieces, one in front, two on the sides, that surround the brushes, and rinse them thoroughly in water. Clean off the brushes and all the lint and gunk around and above the brushes. (A ...
Question about Bissell Vacuums
...clear plastic thing in front of Bissell ProHeat? Bought used Bissell carpet cleaner and the plastic water ****** thing in front is full of dog hair, can't open it up to clean it out. you may have to ...
...clear plastic side pieces at the bottom. If the hooks are not secured properly, before trying to reinsert them, unscrew the black plastic screw so you don't break the tab. It's easy to miss getting ...
315 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions
