Question about Bose Audio Players & Recorders
...turn on afterwards. What is the problem? Disconnect the speakers and test. If the amp locks on there is short in the speakers. If not the Amplifier has some errors. Possible that the output of the ...
...5-seconds and standby light goes on. It may have been caused by a nearby lightning strike/power surge. Sounds like it is going into protect. This is usually caused by a problem in the amplifier ...
Question about Sony Audio Players & Recorders
...Amplifier circuit board (has the speakers attached) 4) Turn it over and remove copper heat shield 5) Resolder joints where the big brown capacitor is and where the wires go to the front headphone ...
...amplifier board together. You should now have an assembly which looks like my second picture. As with the top two boards unplug the connectors on the boards to allow the front section of the dvd ...
...turn the unit on and reconnect the cables once the unit is on. The protect message indicates that a problem was detecteed in the final stage of the amplifier and the unit has shutdown to prevent ...
Question about Panasonic Audio Players & Recorders
...turn unit on I get code DVD F750 after about 5 seconds and unit will not do anything. It is possible that the amplifier had encountered a fault with a higher current drain which had triggered it to a ...
...5 to 10 seconds. I know you'll hear the first click; what I'm looking for is the second click.. You may have DC Offset(meaning a damaged amplifier). As I said before, you may also have a damaged ...
73 questions posted
Usually answered in minutes!
415 Questions
267 Questions
266 Questions
180 Questions
148 Questions