Samson C01U Consumer Microphone "audio mixer" Questions

mixer. Make sure it is up and that the select box box below microphone is ticked. Regards Mark try going to your control panel> sounds and audio devices> voice. select your default audio device,

e300 when I turn off the transmitter in audio mixer the noisy is very higher , WHY? Adjust mixer boa

...plug is inserted. The only indication is when audio is received. The mic needs to be unmuted in the mixer and the gain turned up. USUALLY a right click on the speaker icon brings up the mixer

information on how it works and how to use it how can i get info on a 6 channel mixer/recorder audio- technica at-rmx64 SPAM ***** INTO THE SPEAKER UNTIL IT WORKS

Mixer or Preamp connected to your computer's sound card, or an External Audio Interface with build in Preamp, you will be able to record with the NT1-A. Your Mixer/Preamp/Interface needs to be capable

...Audio MIDI Setup. Select your C01U USB device, and set it to 1ch 16bit. This will set the microphone to record in mono, equally over both speakers. Your input mixer maybe different from your output ...

mixer into the line-in of the computer. Even better would be to just get a USB recording interface, and do the mixing in the software. Otherwise, Behringer, Alesis, Yamaha, and probably other all make

...audio tab and select recording device. From there you should have one or two options of input sources. Pick the one your mic is plugged into and set the volume control. That should do it! If this is ...

...audio mixers. You will not get good sound from it even if you do buy a mini mixer to provide a preamp for the mic. I would suggest a pa like the ones in this link. Most of them have built in mixers ...

audio st55 mic into a computer for recording? In short, no. This PROFESSIONAL microphone requires +48v pahntom power which is privded by a mixing console. In order to connect to the computer, purchase