Question about Heating & Cooling
...the power off at the box for 30 minutes - no change. Remotes are working fine. Any ideas ?? Check for power at unit . If there is power to unit check for blown fuse on circuit board or bad board
Question about Panasonic Heating & Cooling
unit before. If the power is supplied to the outdoor unit first but unit is meant to have power supplied to indoor unit first, outdoor will only stop when power is cut off! In that case, you will have
Question about Comfort-Aire Heating & Cooling
...unit has power,and the inside unit appears to be 36 volt It's a 24v transformer. Your indoor unit houses the transformer for the outdoor unit. The outdoor has a low voltage (24v) supply running to it ...
...power plug". The unit was working last night but this morning I wanted to drain the unit by following the instructions so I moved the unit sideways to connect the drain hose and pushed the power ...
...power to this unit, or there is power but its not working?? Can you tell me what type of unit you have, a central unit, split system, window/wall unit, a/c only, free standing?? If there is no power ...
...unit 2. hold the Power button while plugging the unit back in 3. keep holding the Power button until the unit beeps 4. unplug unit again 5. plug it back in and it should be good Here is the updated ...
Question about Heating & Cooling
Unit has no power, we had a power outage, power coming to unit is good. Break A Breaker No Power To Air Conditioner Tripped AC ... ? 5:08 https://www.youtube.com/watch?v=nS2pBg2QbnM Jun 2, 2013 - ...
...out, don't let go of power 5. Plug the unit back in, it will start, stop and beep 6. Pull the plug out. Let go of power button. 7. Plug the unit back in and power it up. Set controls to your
...power to unit If there is no power going to your unit, then check the service disconnect that is located near the outdoor unit. If you don't have power there, then check the circuit breaker in the ...
...Is there a reset button? unit may have power saver box and until you either open unit and manualy engauge contactor or call your local power company it wont start.It has to feed power off unit to ...
16 questions posted
Usually answered in minutes!
180 Questions
119 Questions
58 Questions
50 Questions
33 Questions