Danby DDR583R Dehumidifier "remove cover" Questions

Ad

Question about Dehumidifiers

1 Answer

...Remove metal cover of de-humidifier to access inner workings. Cover screws may be difficult to see because are often painted to match body color. Usually two or three screws along each side of base. ...

Ad

...remove the cover of a Soleusair HMT-D70EIP-A dehumidifier? I have an internal leak and see no screws that hold the cover together. Screws are normally hidden under the feet, under plastic plugs or ...

Ad

Question about Whirlpool Dehumidifiers

1 Answer

Where is the filter on this dehumidifier. Mod# ad75ust To locate the filter: Shut unit off. Remove "bucket". You should find a "tab" at top of where bucket goes in middle front of unit. Pull down to ...

Question about Goldstar Dehumidifiers

2 Answers

remove the front cover. You can test with a multimeter set to ohms and check if the POT is good. I used some electronics cleaner spray and worked the POT back and forth several times. Check Radioshack

Question about DeLonghi Dehumidifiers

2 Answers

...cover back and remove it (it will have to tilt to one side, don't forget this when putting it back on). 3. Remove the top cover, not forgetting the two screws on top by where the back cover attached ...

Question about Frigidaire Dehumidifiers

1 Answer

...remove cover Good Afternoon Friend, thank you for your post! I see that your question is listed under Frigidaire dehumidifier (FAD504TDD) and that you would like to know how to remove the cover. ...

Question about DeLonghi Dehumidifiers

1 Answer

...cover back and remove it (it will have to tilt to one side, don't forget this when putting it back on). 3. Remove the top cover, not forgetting the two screws on top by where the back cover attached ...

Question about Haier Dehumidifiers

1 Answer

remove both, I removed first the back one then the front one by pulling up, then disconnect the cable that joins the panel on the front cover with the electronic board on the upper right area) I found

Question about Kenmore Dehumidifiers

1 Answer

...in bucket. Remove front cover (little tricky). See if drainage hole at base of tray is clogged with corrosion debris (Mine was). If can't remove cover, use compressed air to blow into drainage

Question about Dehumidifiers

1 Answer

...remove cover of unit and locate the cooling fan its about ten inches round and has blades on it kinda like a motor boat prop , in the center theres a shaft and then a motor , it's most likely a open ...

Not finding what you are looking for?
Danby DDR583R Dehumidifier Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Danby Dehumidifiers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Danby Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...