Danby DDR583R Dehumidifier "display" Questions

LG Dehumidifier model LHD459ELY9. No power to the display? Hi I have a LG dehumidifier model lhd459ely9 and I have no power to the display. Once I plug it in you hear only one faint beep. No lights or

display says full unit empties into a sink but the display says full Check to see if there is a "reset button" and reset it.  Try to unplug, and then replug the power cord.  If the display ...

LED display weak and hard to read. runs constantly LED display weak and hard to read. Unit has run constantly since I bought it in Sept of 2007. Can I get a replacement LED display and is it something

F2 ON THE DISPLAY / WILL NOT RUN / MODEL FDB30R1 I HAVE THE SAME ISSUE . THE DEHUMIDIFIER DISPLAYS F2 , WHICH I CANNOT CLEAR WITH ANY OF THE BUTTONS . THE MODEL NUMBER IS FDB30R1 - FRIGIDAIRE hello ...

why wont it turn on? don't know why wont it turn on? if power is applied then display should show current room humidity , if set is pressed then display should show current set point for desired room ...

Dehumidifier runs continuously and displays higher than normal humidity levels. With the furnace running now during colder temperatures, the actual humidity is usually below 50%, yet the ...

humidity display window always LO The humidity display window always shows LO. I thought over the winter it was because it was so cold and the humidity was very low, so we turned it off until spring. ...

...when I press the up and down buttons to set the humidity at the desired level I get an "on" display on the lcd display. And when it"s running over time the humidity display fluctuates all

display shows 1 will not run only shows 1 on display empty the collection resevoir.  if it is empty, check the float valve on the inside