Question about Microwave Ovens
...blew? Got another fuse and all worked well 3 times then opened the door and shut it and the fuse blew again? replace all the door micro switches What if replaced switches and it still tripping ...
Question about GE Microwave Ovens
...two points, and near by look for a small fuse clipped in, pop it out and replace with same current rating. If fuse blows! one or two door switches are probably bad and will need to be
...high voltage part (such as a shorted diode) If you or someone you know decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and disassembly ...
...out the two points, near by you should see a small fuse clipped in. Pop it out and replace with the same current rating, if fuse blows again check the door switches, usually one or two are
Question about In Microwave Ovens
...wave came on by itself. the off button did not work I unplugged it then plugged it back in and after a minute or so it came back on??? I would check the door switches for corrosion and replace
...replace the plastic handle on the KitchenAid KHMS155LSS-3 you pry open the door cover from the inside to release the upper tangs (~10). I used razor blades wedged between the tang point to hold them ...
...replace it. Thank you! The fuse is generally located on the bottom of the chassis of the microwave. You have to remove the outer cover on a counter top model - or the front panel assembly on an ...
...replace the fuse and you are up and running, if the fuse blows again it is usually caused by a defective door switch that will need to be replaced, at this point I recommend appliance repairman or a ...
...door switches is not making contact. As for the relays they are on the circuit board, but not replaceable unless you are very good at De-soldering. Also keep in mind microwave units have very high ...
51 questions posted
Usually answered in minutes!
80 Questions
95 Questions
80 Questions
69 Questions
56 Questions