...was made (to act as a timer) and after the 5 minutes was up the power disappeared...I recycled the power, but no change Try opening the case and checking the fuse. If blown, check the door
Question about Microwave Ovens
...it blow a fuse and if so can I change it. Is it a built in or counter top model? If countertop , check gfci. Do the lights/ panel work? If so, could be many things including door switch, fuse
...door, but then nothing: it doesn't start (no change) when you push the Start button. This is a 20-year old GE Dual Wave 2 JKP62G built-in. For a few days, you could open and close it a few ...
...door does open during heating and the fan sounds like it may be running, it just simply isn't cooling the microwave or removing the excessive steam. I did not install this microwave myself, so I'm ...
...change from very low resistance (nearly a short-circuit) with the door open to very high (open-circuit) when it's closed. If it doesn't behave like this, make sure the door latch is operating ...
Question about GE Microwave Ovens
...door that all appear the same. The top one is used to work the light. The middle one I am not sure of however it has the heavy wiring. The bottom one works the fan. I figure that the middle one would ...
...door switch or door switch mount. If it's intermittent or random, it may be a bad connection, usually on the control board or a loose fuse holder, or even an intermittent fuse. You should do a ...
...change? It sounds like the magnetron may have either failed or is not being supplied with the extremely high voltage required to run it. YOUR SAFETY IS PARAMOUNT This is a job for a professional but ...
326 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
308 Questions
257 Questions
258 Questions