Danby 22 in. DDW399 Free-standing Dishwasher "tighten spray arm" Questions

...tighten the spray arms? They may have come lose at the fittings so need to be tightened up. You can normally tighten them with your hand. Take any traps/filters out of the dishwasher and clean them. ...

spray arm back on and tighten its VERY wobbly...I am not doing something correct in the last few steps...nut, plastic washer, feed tube cap & wash arm...please help I did the same exact thing, and

...to attach it You need to hold the center spindle with a pair of pliers and turn it while lifting up. This engages the spindle into the threads of the spray arm. A couple of turns will tighten it

...it was installed. That spray arm threads onto a plastic supply tube which is easy to strip, which will cause it not to tighten properly and leak down the side of the dishwasher and acros the

spray arm. I have a recent problem with noise coming from what I think is the lower spray arm. As it rotates, it sounds like a vibration of a loose plastic part or maybe something else?? I did not see

...spray arm has come off we have a frigidaire diswasher that the middle spray arm came off If the arm does not appear to have broken parts, then it probably came unscrewed. The screw and washers may be ...

...spray arm catching on dishes below. Seems to have a lot of play on the arm Replace? More than likely a new wash arm isn’t necessary. The arm should run loosely. If the top rack is adjustable, raise ...

...spray arm on its pivot, then insert the screw and turn clockwise to tighten it. The arm should spin freely. If this arm isn't attached, none of the dishes will wash well (due to a loss of water ...

...down about a turn or so. Snug firmly--DON'T OVER-TIGHTEN the spray arm onto the spinner. Remember, it only uses water pressure to spin so it doesn't have to be "gorilla tight"! I hope this helps