Sharp LC-65D90U 65 in. LCD Television "reset lg tv standby mode" Questions

reset button but it did not work. model no. sharp lc26p50e. I had a same problem with sharp LC-40LE340E. The service told me to change motherboard but I decided to buy a new LG TV. The sharp TV I left

...lg tv, tuned in ok but remote is now not working, wont do anything, wont even put tv in standby mode. Any ideas? The tv tuned in fine but as i went through the channels buttons stopped working now ...

...LG 42 PJ 350 R TV ... I HAVE MY PC CONNECTED WITH IT. YESTERDAY I BOUGHT NEW GRAPHIC CARD WITH HDMI PORT. I CONNECTED THE PC AND TV WITH HDMI ... IT DISPLAY WAS FINE THAN SUDDENLY AFTER FEW MINUTES ...

...lg tv is stuck in standby tried unplugging still didn't work Do a reset to this set, and check. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 ...

...LG 32LG3000 once enters standby next power-on changes to the picture items are lost e.g. turning down sharpening on the standard setting. Also forgets which picture setting was last selected and ...

Lg 60pv450 suddenly went black. Red standby light is on. When I select "input" or try to change the channel, tv turns off. Fault at its main digital board. Short circuited component/s at it. Contact ...

LG 42'' MODEL 42PC3DV I had the same problem with it turning on/off constantly, also it "popped" loudly when I would change channels at times. Now I have a 4 amp fuse blown that seems to keep my bulbs

...LG 42PJ550 TV will switch on with the ZSus disconnected, but will not power on when ZSus is connected. When conneted up it tries to power up, makes a clicking noise but then fails to switch on. When ...

...reset. It may be that the stored data is corrupt and unable to write over with the new settings. Some back door resets are accessed by holding a key down and then switching on the television. Another ...