Sylvania 6842-PEM 42 in. EDTV-Ready Plasma Television "flat irons" Questions

how to take out 2 bad capacitors in my magnavox modle 50f231d/37 Get a soldering iron, some solder and solder wick. Use the wick and the iron to remove the solder off of the legs of the cap. Remove ...

...power board, take a look at all the capacitors, if any of them are bowed out in the back (should be flat) then they are blown. I had 7 blow. The new capacitors I got at a higher voltage, hoping to ...

speakers blew up in 42" flat screen tv my speakers went out in my 42" flat screen tv and i am needing to know can you replace the speakers or would i have to take it to a shop ? please help? the ...

IS THERE A REPLACEMENT BULB IN THE 42' SANYO FLAT SCREEN TV THE COLORS ARE GREEN AND RED ON THE SCREEN There is no bulb, likely an LED with RG colors. You need to get the right LED part number and ...

Is fixing/replacing the remote sensor something an average person can do with instructions? on the lg42lc2d? Welcome to FixYa. Replacing the remote sensor will require technical skills not just an ...

My RCA 42" HD flat My RCA 42" HD flat screen tv will not power on; there is a red flashing light that continues to flash, this light is located where the green light is when the tv is powered on.

Plasma TV gave pop sound and no pictures except very dark shadows almost not visible the back light went out the pop was either a capacitor aor a fuse blowing seeingas you sill have a shadowy picture ...

samsung flat panel tv cuts off - requires a restart every 20 minutes or so Most likely you have bulged capacitors on the power supply board. If your handy with a soldering iron it will probably cost ...

Every few minutes I hear a loud popping noise coming from the speakers on my Sharp LCD 42" If the sound emitting from the speaker is with certain periodicity then it is possible that the some ...