Sony KDF-E50A10 50 in. LCD HDTV "3 red" Questions

Panasonic 3 red blinks loud pop, black screen, 3 red blinks a capacitor has broken down, or blown up. my book states bad monitor. www.ask.com/panasonic/tv/3/red/blinks/lights/mean/

...3 Red Blinks, 4 Yellow Blinks - Lamp Failure 3 Red Blinks, 6 Yellow Blinks - Exhaust Fan Not Working 3 Red Blinks, 7 Yellow Blinks - DMD Fan is not rotating 5 Red Blinks, 7 Yellow Blinks - Ballast ...

...3 red blinks flashes wont turn on I replaced the power board already. The red light flashes 3 times. But if I put the energy star switch in the energy savings mode I get nothing at all. What does ...

...cables. You have 3 colors coming in. Red,Green and Blue. Make sure the Red cable is good. You can do this by substituting the red cable only, or just change all 3 cables Best regards ...

...red. (video 3):same as video 2. when i plug in my game cube "yellow-white-red" chord thing into the following order of holes --"yellow chord=green hole, white chord = white hole, and ...

3. Hold down P until the red light blinks twice, then press 9, 9, and 1. The red light blinks twice again. 4. Aim the remote control at the device you want to operate. 5. Repeatedly press PWR then the

red 3 times every 5 secs. Panasonic Model # PT-44LCX65 Lamp indicator flashes red 3 times every 5 secs. Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays the

...3 green 1 red, 3 green 1 red, 3 green 1 red, then continuous green. I'm guessing this is some sort of error code. Measured the voltages from the SMPS, and all seemed to be ok. I also found that the ...

...red 3 times. it only flashed green to begin with but when i took the bulb out it would flash green 7 times then flash red 3 then pause then flash red 3 times again. The 3 blinks is lamp door not ...

...red. 3. Press each of the number buttons 0-9 until the LED blinks once. This will signify the 1st number in the 3-digit code for the device that is programmed in your remote control. 4. Repeat same ...