Question about Blenders
turns when the blender is turned But when the pitcher is placed onto the motor base, the blades do not turn. One of the parts is not being driven properly. Either the clutch on the top of the motor is
...motor. Turn off and unplug the unit. Plug in the unit and turn the motor on again to clear the over-load condition. Check the blender jar for blockage. If overload condition re-occurs, contact your ...
motor starts but the blades don't turn the motor comes on but the blades won't turn As stated earlier it could be the shaft needs lubing, remove the bottom part of the blender blade... the
...working Using your blade holder, turn the motor from the blade end. 1 or two turns. Tak the blade holder out, Plug in an test Sometimes the brushes in the mototor lose a good contact. SGood Luck
problem and this worked. My problem now is that the blades don't reach to where the motor is turning, so even if they're not jammed the don't turn. If anyone knows and answer to this I'd appreciate it
Question about Vitamix Blenders
...blades does not turn easily and the motor brushes,they get worn with time and theybare esay to check and replace.I wish you good luck and hope you saty away from buying the motor, thats a very ...
...motor turns on. It hasn't been used for a few years When those things are not used for a while the blade assembly at bottom of mixing bowl freezes up. You need to unstick it with a flat blade screw ...
turn. there is not a conection between the motor and the blade shaft. it has worn out. it is not fuctional. the blade dose not turn. IT looks like it conects just fine but. the motor just spins. Hi, I
Question about KitchenAid Blenders
turns on. It sounds like the blade has become jammed on the motor shaft sleeve. You will be up for a new blade and motor shaft sleeve to sort that out. They are not expensive and it is the only proper
Question about Back to Basics Blenders
Motor turns but the blade fails to turn gears and blade turns when there is nothing in blender. but when I try to blend anything in it, the motor turns and the blade is stationary. Is this repairable.
8 questions posted
Usually answered in minutes!
13 Questions
10 Questions