Lowrance Elite-5 DSI Color Combo Fishfinder/Chartplotter with GPS & Transom Mount Transducer 000-10236-001 "transducer cables" Questions

...transducer cable away from any other cables. I put the cable in a 1/4 " plastic housing up to the point where it was above deck and it stopped all the strange stuff. Not sure about the temp issue?? ...

I get an error msg that the transducer is not connected. How can I check idf the transducer is faulty If you can find someone with a Humminbird that has the same pin configuration on the transducer ...

...or bottom structure. All other functions look good. This problem is most likely linked with your transducer. 1. Check your transducer cable and make sure the plug terminals are clean, as well as ...

Where can I install the transducer for a lowrance hd down scanner on my ranger 621 I have the kicker motor on the right side the transducer for hds8 is glassed in I would suggest getting a transducer ...

My Lowrance X-51 is not reading the depth sitting still of running . Do I need a new transducer ? Yes quite possibly... But a few things to try/check first before you go out and get a new transducer..

What transducer "extension cable" do I need for my Lawrence X96 transducer ? My 20' cable is too short for my recently acquired 24' pontoon boat . Is the XT-15U cable a good choice ? Please advise ! ...

...charts and speed all work It shows 3 step image repeats top of the screen / water surface has the transducer packed Check you transducer cable route and connections. Look for kinks, punctures,

Why do I get a clearer picture on my screen when I set my transducer on single 200mhz beam,and the picture is not clear and I get a poor bottom view when set on single 83khz or dual beam 200/83 kHz. I

the transducer cable was cut. can I splice the cable and still get a quality reading? Any trick to this? You sure can splice the cable and the readings would not be effected as long as you perform a ...

why does my transducer not get a return when its deeper than 150 mts?how much amps does it need to operate in deep water? I have a 1 kilowatt thru hull transducer and i do get a good image when its ...