Xtant A3001 Car Audio Amplifier "installed stereo sub amp sound" Questions

...installed the amp and the light is on but no sound from speakers. i've checked everything i can think of. any other ideas? There are several things that you can check for this issue: Check that the ...

...installed everything today. The amp shows that it has power, but the subs have absolutely no sound. Is there something wrong with the amp? check your subs by connecting them straight from the stereo. ...

...sub installation in a boat. I am putting a Jensen KA2500amp in my boat. I have power to it and it is turning on but my 2 10" subs make very little sound. The ground wire from the amp is hooked to the ...

...stereo wires around ( + to -, - to +), checked the ground, tried different RCA cables, tried different RCA outlets (by the way they are plugged into the SW (sub woofer) outlet on the deck)I'm ...

...installed. It works good for few days but now its not cranking up proper bass and sound. It always has three solid red lights everytime. Not sure problem is in amp or stereo unit. Stereo unit is of ...

...installed the amplifier by putting the ground, remote, and power to the amp,and the rca cable in the input.. the amp turned on, even the lights, but there wasnt no sound coming from the amp to the ...

...installed Sat was slappin good puushin 10W6V2 high output box with rockford 1 farad cap. any way blew somethin smelled it amp still green no sound is only thing! sub still works checked on bro's ...

...installed and was working fine for four days in a row suddenly no bass and no sound. check the amp wiring and fuse. every thing is in good working condition. So I turned on, off the stereo suddenly ...

installed quite a few car stereos in my lifetime so I know a good deal about things involving them. I was driving and my sub randomly stopped working. When I got home I tested the voltage of the input

installed in the neg side of the amp. Now the remaining positive and neg wire from each speaker are not connected to the amp they are connected to each other. Is this wiring scheme the problem? Should