Kenmore 21.9 cu. ft. Side-By-Side Refrigerator "happens leave freezer open night" Questions

...and it is not leaking but I am afraid to leave it on. What would cause this problem? One of 2 things happened. Either the ice maker hung up or the water valve stuck open I would guess the water

freezer to a lower setpoint. I have same problem, it usually happens after someone leaves door open too long or after 4-6 months. I usually place two frozen milk jugs full of water in the upper fridge

freezer panel fan hitting icy frost build up behind back plastic panel.  need to know how to remove light and divider panel so i can remove back plastic panel and defrost. I have same problem, it

...freezer compartment only? Leave the door open over night !! A hair dryer may get you electrocuted! We sell appliances for 65 years and I recommend this nation wide Factory repair service! Call A&E ...

freezer plug to see if that is clogged? Hi I reckon you gave either an ice block in the defrost drain system or a blockage caused by loose food bits. You can clear the ice block if you keep the fridge

open all night and this started happening after that. There is a know defect with the freezer side door. read more at http://www.houstongofarappliancerepair.com/Refrigerator.html Also, If you call and

...freezer is frosting over if that makes sense. And the fridge is not getting cold enough. It's not hot but it's not where it normally is either. I thought maybe my 5 yr old left the door open over ...

...leave it unplugged for a couple of days.if you can't remove the wall blow the air into the air slots in the back wall panel,in the right and left side corners and then in the middle,have a light ...

...Leave the freezer door open and turn off the freezer for a night. Be sure to dump out all of your ice cubes too. In the morning it will work like new. To prevent it from happening again, open the ...

...leave the appliance in this state and just keep using it as a "dumb" non-adjustable fridge, is it possible to speculate on whether am I likely getting the factory-default temperatures or whatever ...