Kenwood KDC-X590 CD Player "12 volt plug radio" Questions

Ad

Question about Panasonic Car Audio & Video

1 Answer

12 volt positive terminal of the battery (or any 12 + volt source that is ALWAYS powered). This allows the radio clock to keep time and maintain the radio station presets when the vehicle is off / key

Ad

Question about Pioneer Car Audio & Video

1 Answer

12 volt plug in my home? i have a 12 volt dc adapter that plugs into the wall. can i use it to hook up to my car stereo? I have been installing car audio for over 40 years.A small adapter like you use

Ad

Question about JVC Car Audio & Video

2 Answers

12 volt with car on if not need to find out why .. take to professsinal .. you can also check the yellow wire on radio it should have 12 volts allways doesnt matter if car in off or running this saves

Question about Kenwood Car Audio & Video

1 Answer

12 Volt Battery Wire Pink or Pink w/ White Stripe Yellow I +12 Volt Ignition Wire Red w/ White Strip Red J Radio Dimmer Wire Do Not Use K Headlight Dimmer Wire Do Not Use L Right Front Spkr (-) Blue w

radio is playing or not when starting the vehicle. If, while starting, your alternator is kicking out too much voltage, this could possibly put the Pioneer into protected mode meaning it would produce

Question about Kenwood Car Audio & Video

1 Answer

12 volts on the switched accessory wire (red). 3. make sure that you're well grounded to chassis metal or the ground wire in the radio plug. 4. Lastly, there should be a 10 amp fuse on the back of the

Question about Car Audio & Video

1 Answer

...12 volts and input to radio for amp/spkr etc., When plugged in unit is dead as a door nail ! From looking at cd rear there is another 2 socket points ? Do I require More inter unit connections than ...

...12 Volt Specialty shop. This harness will connect to your new radio harness and plug directly into the vehicle harness without having to cut wires. The Radio Wiring Harness will come with color ...

Question about Kenwood Car Audio & Video

1 Answer

...12 volts when i tested the leads for batt and ignition but when i plug it into the radio the face plate flashes but then i get no power to the unit i exchanged the unit thinking it was bad but the ...

Question about Pioneer Car Audio & Video

1 Answer

...plug and the fuse is not blown but , I get no other lights or functions(Dead), with a CD stuck in it. Is the output transistors out of it?? Suggections?? Mindless1 Did you check the fuse with a ...

Not finding what you are looking for?
Kenwood KDC-X590 CD Player Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...