Kenwood KDC-MP4032 CD Player "car deck flashing protect" Questions

...flashing "PROTECT" I can hit standby and it goes off. If I hit standby again, PROTECT This is often caused by a problem with the speakers or speaker wiring. A speaker wire that's pinched behind the ...

flashing and the radio will not work at all. What do I need to do? I appreciate your help if you can. Thank you, Shank22 In a Kenwood deck, "PROTECT" usually means that one of the speaker output wires

a time and reset the radio but the protect still flashes check the speakers for shorts or grounds. if all checks out fine try disconnecting power to the deck for a few seconds and then reconnecting it

my kenwood flash protect after i reset it sounds like it could be either a bad speaker, a shorted speaker wire, or a bad output ic inside the deck. kenwood kdc-w4034y flahs "protect"

...car and took the deck out, I now am trying to install the cd player in another car i own and am met with "protect" flashing on the display screen...what gives This is a link to Kenwood for your ...

or diconecting the car battery. Please help Thanks I would also check the speaker outputs from the deck. If any of the speaker outputs are touching any metal on the vehicle, it could give that message

my Kenwood KDC-X493 deck is flashing "Protect" , my Kenwood KDC-X493 deck is flashing "Protect" , what should I do to clear this? You can unplug the unit for 10 minutes. This will clear this

deck flashing protect no buttons work sounds like you have some wires touching together. could be need the speakers or behind the stereo. (please rate if this help Thank you)

screen flashing protect you probably have a bad speaker. a short in your speaker wires, or a bad output ic inside of the deck.

...car receiver flashes the word protect and will not do anything else. what is wrong? check your speakers and speaker wires for shorts, grounds or bare spots. if they check out, you may have a bad ...