...oven. Its only 14 mo. old if just your broil element does not work and the bake element does work after using a self clean cycle then your broil element must have went out , self clean is a torture ...
...element, but the oven will not work. unplug range ..remove the back cover plate check all wires all connections ..their must be a burnt /broken /dissconnected wire ..check where the wires connect to ...
...ELEMENT. THE WIRE WILL JUST BE HANGING THERE. BE SURE TO UNPLUG THE OVEN BEFORE REMOVING BACK PANEL. IF THE WIRE IS BURNT, REPLACE THE TERMINAL AND REATTACH TO THE ELEMENTS TERMINAL. IF THE TERMINAL ...
Question about Whirlpool Kitchen Ranges
oven out you can do it this way kill the power you can remove the broil element from the front just remove screws disconnect one lead from element with a meter check for ohms or continuity if none bad
...always work broil heating element works sometimes then not atall oven still works great Sounds like you have a "hot joint" on the supply to the broil element which should be repaired by a
...oven element was not working & buying a replacement element did not fix it, I found the problem in the control panel circuit board. The relay for the lower element had a bad solder connection to ...
just the broil element is heating the oven. It is very common that the broil element is either powered by 120 volts while the bake element is energized in bake or it is pulsed by an electronic control
...oven won't heat up to clean. Have you checked the broil element resistance? Unplug the range and remove the back cover. Remove the wires from the broiler element and place a meter across the element ...
Question about Kenmore Kitchen Ranges
...sound when I try to turn on the bake or broil elements. The oven has power though. (clock works, digital display works.) Go to breaker panel,turn off and wait a minute and turn on,may reset
36 questions posted
Usually answered in minutes!
1,163 Questions
390 Questions
104 Questions
83 Questions
77 Questions
