Sony XM-1252GTR Car Audio Amplifier "amp not power" Questions

power to the amp, REM terminal is connected to 12V, but led is not on and amp is off too. i didn't notice any burned up areas or power transistors nor visible damage on pcb. thank you for response You

cause the amp not to power on. Also check the fuses, both in the amp itself and in the in-line fuse by the vehicle battery, along the live power wire. If they are blown, the amp will not receive power

...amp not power on whatsoever if a fuse is blown or will it still have a light flashing or something. the amp will not turn on if any of those fuses on the side of the amp is blown make sure you have ...

...power my amp was hooked up to four subs two alpine type e's and two sony p5s. it just shut off and wont turn back on. i checked it and its getting power. are u sure you didn't blow a fuse? check the ...

...amp has a too big power draw. In this last case the problem is fixed installing a capacitor on the Amp 12V line. Regards. Ginko. If it's not blowing fuses, then usually you can eliminate power ...

...amp will not send power to subs? I have power going into the amp, good ground, good wires, but the amp will still not power up? 1-check polarity 2-on in power you have power? 3check fusibile from ...

...power to the amp but there is no sound going to the subwoofers. could it be there is not enough voltage when it is powered on. any suggestions Here's a few things I would check: Does the vehicle run ...

...Power going to the amp. Amp does not turn on. Do i need a remote? Bought vehicle with amp in it. LXA 600 Power light does not turn on. you need to make sure you have 5 things. 1. power connection to ...

...power on my amp the green LED lights up then dims and no sound comes from the speakers. The light will come back on and I will here a faint pop from the speakers like the amp wants to work, then the ...

...Amp has no power. My Amp has no power, no power led, i have tested the power to the amp reading 12.3 volts not sure if this is terminal???? check the fuse of your amp,then the wiring must specially ...