Sony Xplod XM-1652Z Car Audio Amplifier "distorted" Questions

distortion I just had a jensen power 900 amp and to rockford 10 subs hooked up in my truck at moibleone audio. there is distortion at low volume and gets better when i turn the volume up but still has

ix406 front speaker distortion at all frequencies I have a Kicker IX406 that distorts the right front channel/speaker. Trouble shooting found a bad solder joint in the cross over circuit that caused ...

Poor sound/ Unable to play anything load without distortion. Cadillac SRX with top end BOSE factory system. Includes on board AMP for Bose system. Added KENWOOD KAC 8151D amp with 2 x 12" Kenwood subs

For a 12 inch 4 Ohm DVC with 1200 Watts Max/400 Watts Nominal what size amp should I be using? The speaker info is telling you that a 400watt input is nominal or stable. and handle anything that can ...

one channel distorted on my peavey 1200 watt amp one channel of my peavey pv1200 stereo amp is distorted Sounds like your output stage took a dump!

...the space, so i can not use a box. well i get this rattle noise at the doors and the subs sound distorted. is there any ideas you can give me? i got the dynamat but dont know if it will work? ...

settings what settings should i put this amp to i have three alpine type 3 in a sealed box you will want to turn your radio volume up till you hear distortion then trun it down slightly. then turn ...

MY amp is going into clip mode. what is clip mode on an infinity car audio amp? either your pushing your subs to hard and its creating a backsurge of resistance, or the spider wires are touching the ...

distortion when volume is high turn gain down. or (input) its too high or you have your volume up way too high and your head unit is sending a clipped signal which will kill your speakers and cause ...

fosgate 1500 amp settings have a fosgate 1500 BD amp on a 13.5 jl audio w7 subwoofer, what are the correct settings to run this sub? low pass of course set the crossover around 80Hz.  Then turn ...