...8 minutes, or you can just measure the voltage with an volt meter and when the cap reads 12VDC you can then hook it up. BE CAREFUL NOT TO SHORT TERMINALS. THIS CAPACITOR I STORING A LOT OF CHARGE. i ...
...8 ohm speakers, you should get impedance matching transformers. Also, you should use a supply capacitor on power feed to amp of about 10 Farads...these are large and not cheap, but they provide ...
...8 petrol 5V engine. power cable 4AWG alpine cda 9835r. Mybe need more power from alternator or need capacitor? Need more info. Are you sying that your lights pulse to the bass? Capacitors help. I ...
...capacitor. When the car is running and the cd player is off the cap reads 12.2 when the cd player is on the cap reads "lo." I'm puzzled i checked all my connections and the seam fine all of a sudden ...
...8 gauge for your application. Also, use a capacitor no smaller than 2 Farads wired across the power supply input to the amplifier to compensate for pulse surges and car power dips. For your ...
Question about Visonik Car Audio & Video
...capacitor I have 8 gauge wiring powering the amps. (I also have a Visonik 204XT 4-ch amp that is running the components and coaxials, and it seems fine) I have 4 gauge ground wire as well, with 8 ...
capacitor at this point, i would recommend getting a 1 or 1.5 farad cap and adding it to the system to take some of the strain off of your electrical system. next on the agenda is your speaker wiring,
Question about Car Audio & Video
watts are you running? If you are looking for a cheap but actually not-too-bad capacitor, you can get a BOSS 8 Farad for 50 bucks on eBay. I was skeptcial, but it does work. Best bet is battery though
175 questions posted
Usually answered in minutes!
217 Questions
152 Questions
73 Questions
53 Questions
60 Questions