Question about AudioBahn Car Audio & Video
...protection light stay's on!! well the amp turn's on with da protection light staying on! Disconnect all speaker wires from the speaker terminals of the amp and disconnect signal cables from the amp. ...
...protection LED remains lit without remote voltage applied, the amp may have other problems. Does the protection LED light with no speaker wires connected to the amp and no RCAs plugged into the
...protection light illuminates Hi the protection light comes on when there is a problem within the amps. circuitry. Generally speaking the protection light normally comes on when powered up while the ...
...protection light stays on disconnect all the speakers from it.. turn it off and then on again, if the protection light is still on your amp has gone out and id take it to a pro to get it fixed. you ...
...protection light stays on when i connect it again? i took it to a friend and he tested it and the green power light went on but when i connected it back to the car it wouldnt play and the red ...
...light protection stays on not green light stays red i have tried to disconnect everything and plug it back up but light stays red check your subs disconnect them the try to power the amp up if it ...
...light will flash its all hooked up right but weird sounds coming out my subs. Disconnect subs from output of amplifier and then turn on car and radio. Does amp stay on or go into protect? If it stays ...
...protection light, try the following: Unhook all input RCA cables on the amp. See if that helps with protection light. With a DMM, measure the voltage going into the amp's power connectors. If it's ...
Question about Lightning Audio Car Audio & Video
...amp a B4.320.4 and the protect light stays on and everything else is good and once and a while the power light will come on and it will work then shut off again and i have double even triple checked ...
...light stays on or is it the wiring? It could be the wiring. Sony amps will go into protection if the ohm is to low. They usually like to see 4 ohm or higher. Unplug your speaker wires and see if it ...
29 questions posted
Usually answered in minutes!
217 Questions
156 Questions
152 Questions
73 Questions
53 Questions