Sony XM-2002GTR Car Audio Amplifier "amp not" Questions

Ad

Question about Jensen Car Audio & Video

1 Answer

...Amp does not turn on. Do i need a remote? Bought vehicle with amp in it. LXA 600 Power light does not turn on. you need to make sure you have 5 things. 1. power connection to the battery/amp 2. make ...

Ad

Question about Pioneer Car Audio & Video

1 Answer

Amp will not power on. Very excited when I recieved my amp and subs. Only one problem, the amp will not power on. I assured myself that the battery to amp wires are powered up. Yes, it is throwin ...

Ad

...amp does not work...any suggestions?? It could be a problem with the head units remote wire (blue wire) that connects to the amp. It turns on the amp when the head unit is turned on, Check that wire ...

Question about Rockford Fosgate Car Audio & Video

1 Answer

amp will not work in that case. make sure you are not over working your amp as well because it seems like that amp is not big enough to power all four of those subs. usually 4 channel amps are used to

Question about Jensen Car Audio & Video

1 Answer

...do I do that You will not be able to do that with a 4 channel amp. You can with a two channel amp, but not a 4 channel amp. You can get, depending on the amp, 300 from half of the amp to one

Question about Car Audio & Video

1 Answer

...amp, so it is not possible to point you to specific troubleshooting information. However, some problems are generic and it appears that you have already isolated the problem to the amp itself. It's ...

...amp will not respond i touched tow speaker wires together and of course the amp stopped. then i tried it about three hours later and the amp worked but i had to plug in the wires and once the wires ...

Question about Legacy Audio Car Audio & Video

1 Answer

...amp. I was not sure if my friends amp was working so i disconnected my amp and connected the cables to his amp. When his amp did not function i reconnected my amp and subs but unfortunately it wont ...

Question about Rockford Fosgate Car Audio & Video

1 Answer

...amp would not power on Check the ground wire. It should be solidly connected to the vehicle chassis in a paint-free location. It may have come loose, which would cause the amp not to power on. Also ...

Question about Logic Soundlab Car Audio & Video

1 Answer

Amp is not stable at the ILP (Impedance Load Presented) Amp is placed in a poorly vented area Amp is a POS or is defective. All amp's are typically warn, but they should not burn to the touch, that is

Not finding what you are looking for?
Sony XM-2002GTR Car Audio Amplifier Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Sony Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...