...outputs are bad. Stop here and get the amp repaired or use as a paperweight. 2. Check the RCA connections behind the radio. They may have come undone. If so, re-connect and dance for joy as you once ...
Question about Pioneer Car Audio & Video
...RCA outputs on the radio- BUT the radio has NO RCA outputs. Help please. Signed, Robin mother of 17yr old son who's trying to install Hi Robin, I think I may be able to help. The instructions are ...
MTX 502 2 chanel amp Pre amp problem? MTX 502 bridged into 2 ohm load. Power system up seems a little weaker than normal. Unhook left rca wire...no change in output. Plug left rca back in unhook right
amp comes on but no sound to the subs and i think i checed all wires and even got new rcas Hi mate I know loads of ppl who have had the same problem. Are you getting an output from ur headunit RCA's? ...
Question about AudioBahn Car Audio & Video
...rca outputs. the sub control may be turned off on the radio (ive seen that alot at my work). if all that is fine, the amplifier may be bad. the rca cables may be plugged into the "out" section of the ...
Question about Power Acoustik Car Audio & Video
...RCA cables or too high of an output level from the head unit could cause this. First, try it with the amp gain turned all the way down. Then, replace the cables with a known good pair. If the problem ...
i have a brutus bxi 1206d 1200 watts, and the amp is coming on fine not protected. But there is no sound output. u can hear a small feedback rumble when connecting the input rca's. But thats it. My ...
Question about Rockford Fosgate Car Audio & Video
...outputs. I presume you have the power light on as well? if not, check for twelve volts at the remote turn-on wire with a meter (you probably already did though). So, in conclusion if the power is on ...
OUTPUTS check continuity between the rca shields and the non-bridging output. if you have none, check for voltage there, you may see under 1vac, and that may change with you touching the metal.&
Just bought a alpine mrp-m450 amp and It turns on, I have my rca input connected and my output to my sub but my sub isn't making any noise, my sub is fine I just tested it make sure the protection ...
3 questions posted
Usually answered in minutes!
202 Questions
203 Questions
165 Questions
142 Questions
149 Questions