Oasis Washer was locking but not registering that it was locked last month, but with button pushing I could get it to work. Now when you hit the start button the digital reader says LID and the lid is
oasis elite washer lid locking mechanism broken accidently the lid got pulled open as macchine was running and a little plastic piece that holds the lid locked in lace broke off, now the lid will not ...
Question about Kenmore Washing Machines
oasis runs fine locks lid drains water and agitates but wont go through spin cycle.What will fix this problem? Try replacing the motor coupler between the motor and pump three small pieces about 18.00
Question about Kenmore Washing Machines
Oasis Washer Problems Cabrio, Bravos, Oasis Washing Machine Overview Washer Components Diagnostic Mode & Tests ' Tips & Tricks Error Codes LF ' Ld ' uL ' oL ' Sd ' lid ' Po ' HC ' dL ' dU ' F1
Oasis washer model Hello, I have a Kenmore Elite Oasis washer model 27087603. When I start the cycle, the water runs, then beeping with a dL code. I think it is the door locking mechanism because I do
lid would not lock, and you know you can't run a load without it locking itself. I pulled the part number off of our lid lock latch and replaced it. It works just fine now. Some of the older ones were
...Washer starts normally, water runs in, lid locks, and then nothing....then a few minuted later the F 51 code flashes. What does this mean and how can I fix it? Dump the appliance. sears delivers the ...
...lid is locked. any idea as to hat went wrong and ho to get the lid opened?? that's an interlock issue..only way to do that is to unplug the whole machine, and then run the timer through it's paces, ...
...Oasis washer; I just replaced the lid locking mechanism (8563937) with the upgrade (W10059230) because of "LU" Error code. First test run and now "LD" error code... So not sure I will buy another ...
Question about Kenmore Washing Machines
...Oasis HE getting F1 code. What does this indicate? When starting machine, I get the F1 code almost imeediately after the red lock lid indicator. Press Stop and then Start, usually takes 2 times and ...
56 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions