Kenmore 4.5 cu. ft. Oasis Canyon Top Load Washer "reset sensors washer" Questions

Ad

Question about Bosch Washing Machines

1 Answer

...washer for 30 minutes and then plug it back in to reset the code. Open and close the door two or three times to reset the sensor. Sometimes the door has been closed too hard and the sensor reading ...

Ad

Question about Kenmore Washing Machines

1 Answer

...washer says LE on the desplay efweffwefewf LE is overloaded motor- most likely speed/direction sensor. Call 1-877-714-7486 for LG reset proceedure and verification test. Sensor is inboard of motor ...

Ad

Question about Kenmore Washing Machines

3 Answers

...reset washer then "fh" code showed. ran diagnostic stopped at "c01" then showed "hf" code. Drain pump was not coming on but I was able to make it come on by pushing on the switch on the side of the ...

Question about Kenmore Washing Machines

1 Answer

...three seconds and release. 3 Select the program and options on the frontpanel you want the dishwasher to use. Press "Start/Stop" to restartthe dishwasher. You have now reset a Kenmore washer

Question about Frigidaire Washing Machines

3 Answers

...washer is stuck on the pause mode. I can't reset the computer. I have unpluged it. I have hit cance, pause etc. It is a model where all the led lights blinks 3 times after I try to cancel or restart ...

Question about Kenmore Washing Machines

1 Answer

...reset the washer by leaving it unplugged over night, I'm assuming the problem is genuine and not just a glitch. More commonly, the heat sensor connector comes loose. The link explains how to check. I ...

Question about Washing Machines

1 Answer

...the level sensor in the washer itself. Most washers have to be switched to reset before setting a lower or higher water level. I hope it's as simple as the reset level switch for you. Good

Question about Kenmore Washing Machines

2 Answers

...washer will not reset. That's what happened with mine, the wires are located on the bottom of the washer behind the lower white panel, and the connection for these two wires is near behind the wash ...

Question about Fisher and Paykel Washing Machines

1 Answer

...Washer fills in squirts for about 10 secs. then stops and beeps. In the spin cycle, the impeller shudders in each direction for about 10secs, then stops and beeps. I've reset the machine and ...

Question about Maytag Washing Machines

2 Answers

...Reset does not work, there may be an internal failure with the washer, that requires service. i just went though the same problem. i thought the pressure sensor was bad,but i wanted to make sure and ...

Not finding what you are looking for?
Kenmore 4.5 cu. ft. Oasis Canyon Top Load Washer Logo

72 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...