Kenmore Oasis HE 27082 Top Load Washer "lid locked shut reset machine" Questions

...lid is shut tightly during use. * Ensure the lid is completely closed and latched. If it's not fully closed, the washer will not start. * Inspect the lid lock for any damage or blockages (e.g., dirt, ...

...lid lock light flashing. Will shut off but continues to flash once I start. I've unplugged machine for days. No change. I've reset machine unplug, wait a minute, lift and lower lid 6 times etc Lid is ...

lid can be opened and when shut and reset the sense-ing light comes on along with the door lock light but nothing happens. I have removed the wet cloths and bailed out most of the water now the washer

...Lid Locked Shut and No Power The washer apparently stopped mid-cycle (it may have been off-balance), and now the lid is locked shut and it has no power at all ... the circuit appears to be fine and ...

machine by unplugging for 60 seconds. Unplugging for 60 seconds good. Then after you plug back in, literally slam the lid shut (then open) 7 times. This makes the washer reset. Sounds weird, but works

locked motor check for objects between tubs Once yall remove the objects yall might have to reset the motor inverter to do so: Shut off the control. Unplug the machine for one minute. Plug back in and

...lid was shut the power button did not work. I pulled the power cable to reset the washer but to no avail this did not work. Now all the LED lights on the front of the machine are on. check door inter ...

...shut lid 6 times and I also tried to reset it and still nothing. Could I bypass the lock and if so how? go to this link and on this page might be something to help you out.... Amana Top load washer ...

...lid locked. reset by using start/pause/ lock button. start washer-light comes on/sensing begins light starts flashing again and washer stops operating LID LOCK LIGHT STAYS ON NO START: Usually either ...

...lid has locked the second time, the washerwill slowly spin the dry load to estimate the load size, and begin adding water. The washer will then move the load briefly, pause to allow water to soak in ...