Kenmore Oasis HE 27062 Top Load Washer "washing machine tub balance ld" Questions

...tub balance ring. This is a donut shaped ring on top of the wash tub. There is a release tab along each side of the tub. The ring should lift out. This is filled with fluid, so it is normal to hear ...

...machine. How far is your drain hose in the drain? Should only go three inches, maybe four and use a zip tie to secure. This will ensure a strong drain with out causing a siphoning problem or build up ...

...balance. So I redistributed the clothes and tried again. Nothing. The clothes are soaking wet, so I pressed CANCEL and tried to just run a RINSE/SPIN. Then I got an error message that said "Ob" The ...

...tub, close lid and press the start button. Sounds as if the main board is bad We had the same LD code error. The technician told us we were using the wrong detergent. High effenciency "HE" detergents ...

...machine, moved it to check the hose, tried several settings to drain,spin,etc, and it still has 3 inches of water in the tub, and won't cycle or run. Once it showed an " OB" on the screen, but now it ...

machine. ob means out of balance and ld means lid not closed. so i would guess that you have a washer that is not draining or just needs the clothes moved around. if you have a plugged pump it will do

...machine back and remove 3 5/16 screws holding bottom panel on . on the right side approx 2/3 of the way back is the pump assy.( a yellow and black hose going to pump. are there clips on the pump ...

...tub to the rear side of the machine. Can you provide me with any help? A common clog point for the Calypso is an area under the wash basket at the inlet hole for the pump. You will need to remove the ...

...Washing Machine The washing machine has a grinding / squeeking sound during the wash cycle? One time the machine stoped during the wash cycle and we got an F5 error code. We just started it over and ...

...machine has stopped, redistribute the load, close the lid, and press START/PAUSE. - LF (too long to fill) appears in display Washer taking too long to fill. Drain extends more than 4.5" (114 mm) into ...