...drain all of the water in the allotted time. If you are unsure where the filter is, it is normally behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and ...
...drain "trap," sometimes described as a U-shaped piece of pipe. Every sink and toilet in your home incorporates a trap that makes use of standing water (at the bottom of the "U") to serve as a barrier ...
drain a pint or more of standing water first. Unfortunately, socks tend to stick to the drum and can be hidden up out of sight where they can fester and mildew. This happened a couple of times, and we
...standing there the washer started dumping water from the door. Turned out to be the filter was clogged. A back to back load caused the water to not drain passed the plugged filter. The ...
standing water and mold! First clean the seal from bottom to the top with bleach. The rag you use will be black with mold...gross. Second peel back the rubber on the bottom and you will notice 3 drain
drain water, and disconnect water all for 2 hours. On this forum I noticed a few techs also noted that either the Hall Effect sensor could be bad or the motor could be locked up which requires another
361 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions