GE WSM2480DWW Unitized Spacemaker Washer and Gas Dryer "washing machines cold water hook" Questions

cold inlet pipes go? [Washing machine: Servis Caress 1500 "A"] I am not to sure if this answers your question but I think you are asking which way the hot and cold hoses connect to the wasing machine?

...washing machine model T8500TP power supply ok but stoped while rinsing no signal on wash Verify that BOTH water hoses are hooked up correctly and turned on. What happens is the hoses get hooked up ...

...washing machine using only the cold water side of the hook up. We won't have hot water available. Do I need to hook up both sides (cold and hot) to the cold water source? At this point it will not ...

...wash uses hot water wash and warm rinse. I have t set to hot/cold wash to get cold water wash. probably the water inlet hoses are hooked up cold water line to the hot water inlet and vice ...

...cold wash cycle. Lowest temp is 20degrees. I turned off the hot water tap but the washing machine stops saying hot water tap is turned off. My Maytag front load washer (Intellisense 6.5 kg) doesn't ...

washing maching won't rinse in cold water I recently purchased a (used) washing maching. I took it home and hooked it up. It washes just fine with cold water, but when it starts to rinse(again in cold

...sensor will read the temperature of the incoming water. If your cold water is 60 degrees then the control will sense this and it may cycle the hot water on to bring the temperature up to 70

cold water going to it. It will go for a while and then reads F-20. What do I do? he F20 error is a no water detected entering machine error and yes it is related to the hot water not being hooked up.

...on the machine, and leave the hot water feed alone. Always select cold water on the machine before beginning a load. If it makes you feel better, cap off the hot water inlet on the washing

...cold tap water valves not turned on. Bad water inlet valve. Bad control or temperature selector switch. The water level sensor is bad. Or you could have only the cold water hose hooked up and ...