Question about LG Washing Machines
...IN BETWEEN THE DRUMS. HOW DO I TAKE OUT THE INNER DRUM TO GET THE OBJECT OUT AND TO CLEAN THE DRUMS? go to appliancepartspros.com or repairclinic.com or youtube.com and check out their repair
...may be a foreign object trapped in between the inner and outer tub. Major Disassembly required to split the outer tub. May also be the rear bearing in which case back half will have to be
Question about LG Washing Machines
...object is between inner drum and outer drum. The whole top of machine must be removed. unplug electronics and hoses remove upper splash ring remove cap in center of agitator remove bolt holding down ...
inner and outer drums. The quickest way to remove this is to remove the drain hose that leads from the drum to the pump and feel around the bottom of the outer drum and remove any foreign objects that
...inner drum out having put nut back on drum spider thread to avoid flaring shaft, using hammer knock shaft through bearings, then using a chisel or similer object knock out bearings and seal, reverse ...
...inner and outer tub, then you will have to remove both the top cover and lid, and remove the agitator and the inner drum to get to the outer drum in order to reach these objects. Not a hard job, but ...
Question about Maytag Washing Machines
...tub. Either something is caught between inner & outer bowl or drum bearings need replacing. Also check outlet hose going to pump sometimes object caught there causing the bowl to be tight to
...outer casing Could possibly be a broken drum cross. The part where the bearingshaft is connected/srewed on the inner drum. Could also be a foreign object stuck between innner drum an the outer ...
...inner and outer drum of a Hotpoint WDM73 washer/dryer. Is it possible to remove these without taking out drum? Any other ideas? I would be inclined to leave well alone,the objects should find there ...
...some object stuck between the inner and outer drum. You will most likely need to remove the inner drum to get to it, which, depending on the model and type of machine, can be quite a difficult
497 questions posted
Usually answered in minutes!
992 Questions
874 Questions
398 Questions
323 Questions
255 Questions