Kenmore 84052 Dryer "not working" Questions

not working at all now Hello, My dryer was running, but not heating. I replaced the thermal fuse kit and the thermostat, and it worked great for about 5 minutes. Now, it will not even turn on. I tried

...not working, used hair dryer still not working Is the main board you replaced the TCON board or was there another one. Some refer to the power supply board as the main board. Either or, replace the ...

...not working. Need to access from the back panel to see: 1- The igniter is working or not. 2- If the igniter is working but burner never starts then the thermal sensor is not working so gas valve is ...

...not working," I mean that the drum does not turn, no heat, no noise at all - just dead as if it is not plugged up. (It is) take out the plug for your safety ??? check your cable with a multi meter ? ...

...not work Kenmore dryer, model #417- ''clean lint filter'' light is on and dryer will not work. Can you assist? Thank you. is the door trigger working properly if its faulty then the dryer will not ...

...the other auto cycles do not work, then one of the temperature sensors is not working. If the time cycle doesn't advance at all then the drive motor on the timer is bad. Complete timer needs

not working I have an older Kenmore dryer and the blower and heat are not working. Any idea what part I might need? if nothing is working you can unplug remove the back and check the main fuse located

...are fine. If you have changed the broil element and still not working. Then most likely it is your control board not giving the current broil element when selected. Need to change the control

light in dryer does not work. Replaced light, light in dryer does not work. Replaced light, still does not work. Took light out, unpluged dryer and cleaned out light area to remove lint and again ...

...not working causing the dryer to not work or is the heater making the timer not work? any help would be great as to were to start my search thanks for some reason it says my dryer is not a valid ...