...set the unit is charged for. If the line set is shorter or longer refrigerant can be removed or added to account for the difference in line set. Some people just install the amount of line set the ...
...set the temperature. Setting temps on a Wall unit or a window unit - depends on where the Unit is in the room ( area), the stat in the unit is reacting to the the return air ( at the Unit) . If the ...
Question about Heating & Cooling
...added backup resistance heat. Then again it could be a settings problem. Ifd the unit is not set in the right mode, and the thermostat is not set correctly, the unit may operate and not produce
unit set to, and then turn unit back ON when room warms up above temperature I've got unit set to? Does Fan On keep the unit running continuously, even if room reaches the temperature I've got
Question about Pioneer Heating & Cooling
unit never stop blowing air when set to AC? The system ran fine when it was set to heat and the entire system cycled properly all winter. Now that it's on AC the outside unit cycles on and off but the
Question about Amcor Heating & Cooling
...unit was set up a week ago the technician should warranty his work and come back and take care of the problem for you, not knowing what was set up and how, it's hard to say if it's a problem with the ...
...unit goes up to 88 by itself Maybe you set the tempture to 70 and when the unit is runnung it sinces the room tempture. How do you make this unit cooler. I set it for 68 and the temperature stays at ...
...supply heat at all. Regardless of where the thermostat is set, the unit blows cold air as if it were set to AC. What is the problem? TO GET HEAT, SET MODE OR SELECTOR SWITCH ON "HEAT" AND ALSO ...
unit to check pressures The AC manifold gauges set have the three chambers: the low pressure chamber (left side), utility chamber (middle), and the high pressure chamber (right side). When technicians
...i need to add for the indoor unit and the line set. this unit uses r22 Normally, the tag on the outside unit (as far as amount of refrigerant) takes into account the line set and the evaporator
231 questions posted
Usually answered in minutes!
75 Questions
71 Questions
75 Questions
36 Questions
23 Questions