Haier hwr10xc6 Air Conditioner "set humidity level dehumidifier" Questions

...set at 40% humidity ( I assume this means this is the amount of humidity you want). It was OK up till a week ago, saw water discharged out hose. Nothing now. 40% is the level of humidity it will ...

...set the humidity extraction knob on Maximum. 2. Air intake filter is dirty or clogged. Turn unit OFF, & Unplug the Unit, before removing to inspect & clean it, if necessary. If washed, allow ...

...humidity extraction level is set to HIGH. Lower it to 32-35%. If you have a manual unit turn the humidity extraction level knob to Maximum. 2. Air intake filter is dirty or clogged. Turn unit OFF, ...

...humidity. Press the arrow down button to the lowest level that the LCD display has. The Lower the setting, the more moisture is removed. The higher the setting the less moisture is removed. Make sure ...

...Set the humidity extraction level to Maximum. 2. Air intake filter is dirty or clogged. Turn unit OFF, & Unplug the Unit, before removing to inspect & clean it, if necessary. If washed, allow ...

...set the ac to 78. The fan is on the 2nd setting. Problem: high humidity in the space. Difficulty maintaining comfortable temp levels. We just cleaned all the vents. We also have a fresh air exchange ...

Is it cheaper to run the AC or the dehumidifier on this unit? Run the humidifier to maintain a humidity level no greater than 60%RH. Click HERE for additional information regarding information on Mold

Set the humidity level at 35 to 45% and allow the unit operate as it should. Always remember, there must be at least 2 feet of clear air space around the dehumidifier for it to function properly. Hope

...humidity extraction level is set to HIGH. Lower it to 32-35%. 2. Air intake filter is dirty or clogged. Turn unit OFF, & Unplug the Unit, before removing to inspect & clean it, if necessary. ...

...humidity extraction level is set to HIGH. Lower it to 32-35%. 2. Air intake filter is dirty or clogged. Turn unit OFF, & Unplug the Unit, before removing to inspect & clean it, if necessary. ...