Dell Dimension 8250 PC Desktop "fan error" Questions

...error. Fan not working on processor because I hear no sound from fan. Most of the time you'll never hear the CPU fan. If you don't hear the normal fan sounds coming from your computer, it is most ...

error message: "Previous Fan Failure". I changed the settings in bios to : do not report" on keyborad but the fan still did not start though the error message is not coming anymore. Compuer shutts off

...fan, and gives an error each time you turn the computer on. I purchased a "new" fan on eBay of the same model that came outta my computer (I say "new" becuase the fan I bought actually is even older ...

...fan but error log shows keyboard failure. Computer freezes up shortly after boot/reboot. I have replaced cooling fan, but Bios error log gives keyboard failure message. if you see lights get on ...

...fan suddenly got very loud. The machine has been quiet for a couple of years. At first it showed error light # 3&4 - & on shutting down, wouldn't restart. So I went out and changed the memory stick. ...

...error gone i would really appreciate it.thanks!! The cpu fan has a three wire connector that connects to the mother board. Usually located to the right & up from the cpu. If yours is connected ...

error message. Thermal event are serious, (too hot) make certain of your fan/fans are working. Clean out the dust that has accumulated. Use you computer in a cool environment if possible. If the error

...error message. The cpu fan has went bad so rather than frying your processor the computer shuts down. Dell used proprietary heatsink/fans for this model so you'll have to contact them to see if they ...

error or alternatively does any one have the correct wire pinout for the fan/motherboard it uses a four wire fan with a five pin connection currently I have it wired 1-white 2-red 3-black & 4 blue

...error and/or reboot without warning. If you have recently attempted to add a new hardware device, remove that device to make sure it is not causing your issues. Make sure you are not encountering any ...