Epson Stylus CX4800 All-In-One InkJet Printer "setting fax" Questions

Epson Stylus CX5700f I have just setup fax. I am having problems receiving faxes and telephone calls Have just tonight setup fax number with Telecom, so I now have a landline number and separate phone

...setting: Press Setup. Select Fax Settings, then press OK. You see this screen: Select Communication, then press OK. Press and select ECM. Then press and set it to Off. Press OK. RECEIVING Try the ...

canot recieve fax i can send a fax but cant recive one Try these settings ::>> 1.) Press Setup 2.) Select Fax Settings, then press OK 3.) Select Communication, then press OK < under communication try ...

...FAX and I validated that my setting were good and I'd even hear the Fax line pick-up and get a "no Answer" error.  I went into FAX settings and just turned something called TCM off and then ...

How do I receive faxes with an Epson Stylus 300f? I have problem sending faxes, but struggle to receive any faxes your computer has to be set to answer the phone so it receives the data and sends it ...

setting? Had a quick look and found that you may have turned off the auto-answer mode. The way to set it back up is provided on page 5 of this manual: ftp://download.epson-europe.com/pub/download/3217

how can i fax from a printer hook your phone line up to it.  Hit the fax button, set your document in the feeder face down, and dial a working fax #, and then hit the send or enter button. ...

...fax setting on the printer that you have all the info already ( ur number and stuffs), communication setting on the printer, drd set to all, ecm to off, v.34 to off, rings to answer 6 and dial tone ...

...setting the fax BAUD rate to 9600 bps or slower. So does anyone know if it is possible to set the BAUD rate on the Dell MFP 1600n multifunction printers? I same issue and plug the Analog phone on the ...

...my VoIP phone. I have been able to send faxes, but I cannot receive faxes. I have changed all the settings as advised, except the baud rate. I cann't get Epson to advise: How do I change baud rate ...