...reads Out of Paper? There are cards ready in the hopper? please install the driver again, then send the command IM (print testcard) If not work, Try to send !SA command and then try to print the
...card is not ready. Check the MIO card documentation. More then likely, the printer will display this message until the problem with the card is corrected. You can check to see if this is the problem ...
Question about Konica Minolta Office Equipment & Supplies
...does come to a ready state than I would recommend: - Replace the Network Card If after replacement of card and attempted both EIO slots. Then you will need to replace the formatter. Hope this
...ready as if nothing has been sent Check lan card led blinking pattern., Replace lan card(Jetdirect card 620n) & check, mostly lan card issue might be there.. Hello. I have seen this problem on ...
Question about Konica Minolta Office Equipment & Supplies
...ready then press menu... arrow down to memory card press forward arrow you will see format press enter you will see processing when its finished you will see ready... turn off machine... unplug it... ...
Question about Konica Minolta Office Equipment & Supplies
...Card Not Ready" error when I print diagnostic. I also just noticed that my LCD display has gone blank. Any suggestions? Hi Can you just tell me whats RAM size of yours . I doubt this issue occurs ...
...card hopper lift problem the printer is tell me not ready i dont understand it speaches but i can tell you, please can you send the solution for me...... my email address: ...
...card of some sort. i just want to print from the computer but the computer is saying the printer is not ready. how can i change the setting on the printer to printe from the ...
...goes ready then power it off again, refit the card and try again.Sometime reseating the jetdirect card will sort this problem If it doesn't work, then i recommend replacing the jetdirect netwok
2 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions