GE 2-9450A Phone "dial tone static" Questions

...dial tone Just recently the phone started with static on the line and no dial tone. It is only 18 months old. I unplugged it and plugged in a standard phone which worked fine. I used another cord, ...

Dial tone My phone was disconnected when my computer was being fixed. I have gotten the computer back and have hooked it back up. Now the phone has no dial tone. How do i get the dial tone back? my ...

...dial tone. Only static? no dial tone. Only static. Can't make or receive calls Check the phone line were it comes into the house there is usually a point where the phone connection from the the TELCO ...

Dial tone sounds static and voice echos. How to fix? Tried to unplug and wait, still gets static sounding dial tone and echo when talking. Hi anonymous, ;) You can try to reset the phone by ...

...5.8 GHz dual phones. One phone will not register at the main base. The other phone registers, but has static on the line instead of dial tone. Dial tone is good to the phone. i would call uniden.

...dial tone. Display says I pick the phone up, no dial tone. Display says line in use. People calling in say it rings, but answering machine doesnt pick up and I can't call out either. Also, there's a ...

...dial tone I have a panasonic KX-TG2624 with two intercom hand sets. There is no dial tone, only static. The mail phone is on PhoneBook, the 2nd one is also on PhoneBook (1) and the third is also on ...

...dial tone was gone. So I called my landline from a cell phone and it would ring, I would pick up the landline hear myself on the other line so I hung up, then picked up the landline again and had a ...

...dial tone or just static or 2 beebs GE cordless phone DECT 6.0 Model 28213 Series When I want to use the phone and push the talk button it either has static or there is 2 beebs and no dial tone. It ...

...dial like that. Any advice? Press the MENU button until TONE/PULSE MODE shows in the display. Press either arrow key to display the current mode. Pres an arrow key again to select TONE mode. Need the ...