GE 27851FE2 Phone "handset states registered" Questions

...handset states INVALID . I removed the batteries, pressed the center row of buttons, which were all advised, nothing new happens. I can't seem to get passed the ''press LOCATOR'' message. The handset ...

...handset I get an error that states 'no connections'. The user manuel dose not have a trouble shooting section. Open for assistance. Thanks This is the registration procedure Step 1: press MENU-6 and ...

...phone must be registered (this is the status a handset should be in from the factory) 8. Place handset on base and it will register as normal Get one phone going and call uniden theyre quite

Handset is fully charged and states No Link to base. Move closer to base, try again. This does not work as it has been tried. before using the phone,the handset has to be registered with the ...

...states "out of range". I have reset the base and attempted to re-register the ORIGINAL handsets without success. Is there something I'm missing or doing out of sequence? October 10th, 2013 at 9:19 ...

Handset Registered", then "Handset #x" or it will say "Registration Failed". NOTE: the battery must be well charged prior to the registration process, a weak battery may cause a "Registration Failed".

handset. All my 3 handsets are deregistered now and I can't register any one of them. My question is: How can I delete all the 10 registered handsets from the base so that I can start registering anew

...Handset De-registered" From the Base Station, select menu and then "Register Handset" The base station will display a message stating, "On handset, hold # key for 2 seconds" Press and hold the # key ...

...handset I purchased is already registered to another system and is searching for that system. The handset came with the battery disconnected but charged. I have attempted to reset the handset by ...

...is not the same on all models. I am going to deal with the cordless main base only Remove any handset from the main base cradle. Then On the waterproof handset Press and Hold the # sign until ...