...It only mentions W1. w2 wire is second stage heat does your furnace have two stages.look at gas valve it would have 2 valves/ sol w2 will go to w2 on stat. if a single stage furnace w2 is not ...
...W1 terminal at the thermostat. The W2 wire from your furnace(if your furnace is a 2 stage furnace) you connect to the W2 terminal at the thermostat. The G wire from your furnace(indoor fan) you ...
Question about Honeywell Heating & Cooling
W1,W2, Y1, Y2, etc. Simplest method is to remove wires from old stat one at a time. mark where they came from and then install at same desinated terminal on the new t-stat. Hope this helps. be sure to
Question about Honeywell Heating & Cooling
W1-W2, first or second stage heat) Y- Yellow- Cooling (Same applies as above i.e. Y1-Y2) C- Common (Most people use blue unless it is used for B terminal and sometimes cooling on older 4 wire systems.
Question about Honeywell Heating & Cooling
...If you have a brown or black wire hooked up and you have no humidifier/dehumidifier, air cleaner etc then they are most likely unused unless they are going to the W1/W2, Y1/Y2, R, C, or G
...W1, W2 and O. I would like to install the Honeywell 230B which only has Rh, Rc, W, Y and G. I have an electrical furnace and AC. the 230 doesnt sound compatable with your system. you are gonna need a ...
Question about Honeywell Heating & Cooling
...W1 &v W2 This is for first and second stage heat. You can put the two "together" on the W terminal on the old stat. Do not hook up the greens (blower fan wires). Do not hook up the blue wires (They ...
2,089 questions posted
Usually answered in minutes!
87 Questions
47 Questions
43 Questions
32 Questions
17 Questions