Honeywell SureSet HZ-339BW Ceramic Compact Heater "reset heater" Questions

...a manual.How do i get a manual for this heater? reset means a malfunction has occured a bad wire etc. most are non resettable if it is resetable find out problem that has occurred before

...off and I have gone through the trouble shooting methods in manual. want to wire around the safety reset to test it. It is a 7 wire safety reset. Help! Never wire around a safety on a heater.

heater will not run The reset button will not stay in on my Reddy Heater 100,000 BTU Model R100B You don't say, but I am assuming that the motor is running and there is combustion in the combustion ...

...reset button in the heater that needs to be reset? they is no reset internal the electronic circuit is deferctive some electronics parts need no be changed. i have fixed one and modify it to be more ...

...HEATER RESET - PUSH". Make sure your unit is clean and free from lint and dust, which will accumulate over time and use. Inspect the unit for any signs of scorching or damage from whatever was put in ...

...reset itself if possible. Then plug the heater back in and turn it ON. If it didn't reset itself, check the receptacle its plugged in to to make sure that it's still working. If it's not, the circuit ...

...heater still will not do anything when plugged in. Reset button does nothing. I have a Dayton Model # 3e219b 150,000 BTU potable heater and it runs fine with the top cover off.But if I put the cover ...

reset my Comfort Zone Heater Model CZ20118 my heater shows no sign of power. how do I reset it? Model CZ20118 no sign of power ===main power line or power switch may be defective,,,if u want to reset=

...Does anyone know if the directions are on line for this unit. The only way to reset this heater is to unplug and waite 30 mins then Plug back in. to turn off Tower hold the Button down for 2

reset when the heater cools down. If not you may have a problem a circuit board or a bad temperature sensor or loose wire. You should find out why the heater overheated. It could be a dirty fan or fan