HP LaserJet 4730mfp All-In-One Printer "time adjustment successfully" Questions

...successfully done, restart printer several times & verify start button light, if its green every time 'u' re success. if not cleaning required for CCD which is major work & not

adjustment, press the AUTO/ MANUAL/PHOTO ( / / ) key to select MANUAL ( ) and adjust with the LIGHT ( ) and DARK ( ) keys as desired. l For photographs, select PHOTO ( ) and then adjust with the LIGHT

error code c2558 for konika Abnormally high T/C ratio - the t/C ratios detected by the TCR sensor board ( tcrsb) are above the threshold for the detection of abnormally high T/C ratio for three ...

...SUCCESSFULLY. Print once OK... then tells me offline. Adjusting offline by taking Offline check OFF, prints once more OK, then next time printer selected as "default" says ERROR the follow up ...

...scan as a pdf or adjust the scans. Is there any way I can fix this problem? thank you for your time and help. This site has a all in one printer disk> ...

...being shredded half way through and then the printer jams. I have tried printing one page at a time but no success. Have you setted up in the printer driver to print on label? the printer will ...

...WSW13=01011010 - Press SET - Press STOP - Press 99 to exit maintenance mode, and once back to the time and date screen, send a single page fax to 1300 368 999 and you will receive a faxed reply

... is in some cases I have been able to clear the paper track of debris that was deposited there over time. Worth a try, as I have fixed a number of printers this way, saving costly repairs. Hope this ...

...place. Retiming these old guys if they lose timing is something I'm successful at about 2 out 3 times. Most of them are pretty worn out and nothing wants to quite line back up right once you lose ...

...it. calibration is all thats needed, from your fiery or splash. These machines are rebuilt all the time and they bounce abck from everything. Dev change will just make the colour better, not worse, ...