Question about HP LaserJet Office Equipment & Supplies
replace 3, paper empty tray sensor actuator arm snapped - unable to raise cassettetray- replace arm 4. paper feed roller fail to turn- feed unit clutch assy faulty- replace feed asseembly 5.paper tray
Question about HP LaserJet Office Equipment & Supplies
...replace the tray 2 pickup solenoid. The tray 2 lifter-drive assembly or the stack position sensor (PS107) is defective. Replace the lifter-drive assembly. See Tray 2 lifter-drive assembly and/or ...
...replace pickup rollers This should help. Good luck ! Cassette (Tray 2) paper pickup and feed rollers To remove the paper pickup and feed rollers 1 Remove the cassette. 2 Locate the two rollers on the ...
Question about HP LaserJet Office Equipment & Supplies
...tray 1 - used for legal - i saw a response to a similar question - and the recommendation was to try a maintenance kit to replace the feed roller and clean the rollers in the interim - any other ...
Question about HP LaserJet Office Equipment & Supplies
...in 4 spots but paper wont advance. marks are about 1/4 inch long those marks are the rollers trying to move the paper. check to see if your tray 2 is lifting.if it is then replace the feed
Question about HP LaserJet Office Equipment & Supplies
...Tray 2 Does anyone know how to get to the existing roller and seperation pad in tray 2. They need replacing but I just can't get to them? I can see where they are but can't remove any of the ...
Question about HP LaserJet Office Equipment & Supplies
...tray 2" although there is definitely no paper jam. Laserjet 2300dn keeps giving "paper jam in tray 2" error message, although there is no jam. Anybody have an explanation? If you did not get ALL the ...
...Tray 2 Open or Empty Our HP2420 Laserjet prints just fine but just recently it will not print from tray 2 and you have to use the manual feed. I've tried to see if there's any paper jam but none is ...
Question about HP LaserJet Office Equipment & Supplies
...Tray 2 only. Tray 3 and Tray 1 (manual feed) are fine. I have replaced rollers and it continues to jam paper. Now I am trying to bypass the Tray 2 that jams to print on manual tray with Letter and ...
tray 2. Any suggestions? Thanks in advance. The pickup rollers are worn out. Replace them and your problem will be gone. While you are sourcing them, use some alcohol. This may give them a little more
145 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions