HP LaserJet 5200 Printer "4 picks 2 pages" Questions

...4,1/2 or 3/4 fed will be sensor at falt or 2nd tray conectors dirty or making false contact. See pages 228 and follow all the instructions - it worked for us- ...

...2, sep pad is worn ( cant seperate pages correctly)- replace 3, paper empty tray sensor actuator arm snapped - unable to raise cassettetray- replace arm 4. paper feed roller fail to turn- feed unit ...

...2 & 3.. 3. Check PIU unit for paper jams 4. Check Fuser sensor flags. To reset the counter: Hold enter button & switch on the machine, wait till display shows cold restart, scroll to reset ...

2 a couple of months ago & this problem just started. Hi Natoli3, This could be a mis-match of paper sizes. Example, computer could be sending an A4 page to the printer. The paper size in the could be

2. Check gears on the fuser unit. Any broken or worn gears? 3. Check default paper size setting in printer, paper size setting on tray, paper size setting in printer driver and document page. 4. Leave

2. With the product turned on , disconnect the power cord from the rear of the product. 3. Unplug the power cord from the wall outlet. 4. Wait at least 15 seconds. 6. Plug the power cord back into the

...2. Use the (LEFT ARROW) or the (RIGHT ARROW) button to select Cleaning Mode, and then press (SELECT). A page feeds through the printer slowly. Discard the page when the process is completed. 3. Load ...

...2. Press and hold the GO button. 3. Turn the printer on, and continue to hold the GO button for at least 5 seconds, but no longer than 15 seconds. During this process, the Attention LED turns on. 4. ...

...4 inch wide Yip, its fuser film alright. You could pick up a fuser unit / kit from: http://www.printersupplies.com/c-Laserjet3015Parts.html and fix it yourself using the manual in this post: ...

...2/3 to 3/4 of the page of a 1 page doc My HP laserjet 5L has a tendency to print only 2/3 to 3/4 of the page on a one page document. I can print a full test page, but not a document. I haven't had ...